1. Colominic Acid (SB-804 HQ)
  2. Polyvinylpyrrolidone (3) (NaCl aq./CH3CN Eluent) (SB-806M HQ)
  3. Calibration Curves for LB-800 Series (Aqueous Eluent: Pullulan)
  4. Polyvinylpyrrolidone (6) (NaCl aq./CH3CN Eluent) (SB-806M HQ)
  5. Sodium Dextran Sulfate (SB-806M HQ)
  6. Effect of Sample Load (Pullulan)
  7. Influence of Salt Concentration on Retention Time of PEG with GF-310 HQ and GS-320 HQ
  8. Comparison of Chromatogram of PEG Mixtures
  9. Influence of Analysis of PEG Mixtures with GF-310 HQ by Composition of Eluent
  10. Influence of Analysis of PEG Mixtures with GF-320 HQ by Composition of Eluent
  11. Polyacrylamide (3) (Comparison with SB-807 HQ and SB-806 HQ)
  12. Poly(Ethylene Glycol) Standards (9) (GS-220 HQ)
  13. Poly(Ethylene Oxide) and Poly(Ethylene Glycol) Standards (1) (SB-804 HQ)
  14. Selection of Column (1) (Sodium Poly(Styrene Sulfonate))
  15. Calibration Curves of Hydrophilic Polymers (2) (Sodium Polyacrylate)
  16. Selection of Column (3) (Poly(Sodium Methacrylate))
  17. Hydroxyethyl Cellulose (2) (SB-805 HQ)
  18. Dextran (1) (SB-805 HQ)
  19. Dextran (2) (DMSO Eluent) (KF-806M)
  20. Dextran (3) (SB-806M HQ)
  21. Dextran Sulfate
  22. Poly(Ethyleneimine) (SB-804 HQ + SB-803 HQ)
  23. Polyacrylamide (1) (SB-805 HQ)
  24. Poly(Vinyl Alcohol) (2) (Aqueous Eluent) (SB-803 HQ + SB-806 HQ)
  25. Poly(Vinylpyrrolidone) (3) (NaNO 3 /CH 3 CN Eluent) (SB-805)
  26. Sodium Polyacrylate (1) (SB-803 HQ + SB-802 HQ)
  27. Optimization of Mobile Phase for the Analysis of Sodium Polyacrylate (GF-7M HQ)
  28. Poly(Sodium Methacrylate) (GF-710 HQ)
  29. Sodium Poly(Styrene Sulfonate) (1) (GF-510 HQ)
  30. Sodium Poly(Styrene Sulfonate) (2) (GF-7M HQ)
  31. Influence of Column Temperature on Retention Time of PEG (GF-310 HQ and GS320 HQ)
  32. Pullulan Standards (1) (SB-804 HQ)
  33. Pullulan Standards (2) (GF-310 HQ)
  34. Pullulan Standards (3) (GF-710 HQ)
  35. Pullulan Standards (4) (Effect of Flow Rate) (SB-2002.5)
  36. Pullulan Standards (5) (Effect of Temperature) (SB-2002.5)
  37. Pullulan Standards (7) (GS-220 HQ)
  38. Poly(Ethylene Glycol) Standards (6) (DE-613)
  39. Poly(Ethylene Glycol) Standards (7) (SB-2002.5)
  40. Poly(Ethylene Glycol) Standards (8) (SB-802.5 HQ)